Showing 23–44 of 1247 results
Access Control EF39EM – W Embedded Metal
Access Control EF39EM - W Embedded Metal Specification:
- Power Supply: 12V DC
- Current Draw: ≤ 40mA (standby mode)
- Dimensions: 90mm x 60mm x 20mm
- Operating Temperature: -25°C to 65°C
- Housing Material: Solid metal, anti-vandal structure
- User Capacity: Up to 1,500 users
- Access Modes: Supports RFID card access, PIN input, or a combination of both
- Card Compatibility: 125kHz EM RFID cards
- Installation Type: Embedded, designed for direct wall or door frame installation
- Weather Resistance: Suitable for both indoor and outdoor use
- Backlit Keypad: Ensures visibility in low-light environments
- Tamper Alarm: Equipped with a tamper detection alarm for added security
Access Control EM7612 Keypad System
Access Control EM7612 Keypad System Specification:
- Cellular Technology: Typically supports 2G, 3G, 4G, or 5G technologies.
- Frequency Bands: Operates on specific frequency bands for different cellular networks.
- Data Rates: Supports various data rates for different cellular technologies.
- Power Consumption: Low power consumption to optimize battery life in IoT devices.
- Interfaces: Provides interfaces like UART, SPI, or USB for communication with other devices.
- Security Features: Includes security features like encryption and authentication.
- Operating Temperature Range: Operates over a wide temperature range to suit various environments.
- Size and Weight: Compact and lightweight design for easy integration into IoT devices.
Access Control GB – 08C ID Rfid Reader
Access Control GB - 08C ID Rfid Reader Specifications:
- Operating Frequency: 125kHz
- Reading Distance: Typically up to 5 cm (depending on the tag or card used)
- Power Supply: 9-12V DC (may vary depending on model and installation needs)
- Output Format: Wiegand 26/34, RS485, or other commonly used access control formats
- Dimensions: Varies (usually compact, wall-mountable design)
- Environmental Rating: IP65 or similar for outdoor use (resistant to dust and water)
- Operating Temperature: Typically -20°C to 60°C
- Material: High-quality plastic or metal housing for durability
Access Control GB-MD – ID
Access Control GB-MD - ID Specifications:
- RFID Technology: Frequency: 125 kHz or 13.56 MHz
- Card Types: Proximity cards, smart cards, or mobile credentials
- Communication Protocols: Wiegand interface (26-bit or 34-bit)
- Power Supply: 12VDC
- Operating Temperature Range: Typically -20°C to +60°C
- Humidity Range: Typically 10% to 90% RH (non-condensing)
- Durability: Weather-resistant and robust construction for indoor or outdoor use
- Security Features: Encryption algorithms for secure communication
Access Control GT – 22E ID METAL
Access Control GT - 22E ID METAL ID EM Master Care Specifications:
- Card Technology: EM (Electromagnetic) 125 kHz
- Material: High-quality metal-reinforced ID card, adding durability and preventing bending or damage
- Dimensions: 85.5 mm x 54 mm x 1.8 mm (standard ISO card size)
- Weight: Approx. 15 grams
- Read Distance: Up to 10 cm (dependent on reader specifications)
- Operating Frequency: 125 kHz (standard EM frequency for access control systems)
- Compatibility: Designed specifically for GT-series access control systems and other EM-compatible readers
- Data Encoding: 64-bit unique identifier (UID) encoding for secure access authentication
- Operating Temperature: -20°C to 60°C, suitable for both indoor and outdoor environments
- Humidity Resistance: 0% - 95% non-condensing, ensuring performance in various climate conditions
- Warranty: Typically 1-year limited warranty (confirm with manufacturer)
Access Control GT19 Waterproof RFID Card
Access Control GT19 Waterproof RFID Card Specification:
- Model: GT19 Waterproof RFID Card Reader
- Operating Frequency: 125kHz (commonly used for RFID access control)
- Protocol Supported: Wiegand 26-bit output (standard for access control systems)
- Power Supply: DC 9-16V
- Operating Temperature Range: -20°C to +60°C
- Humidity: 10% to 90% RH (Non-condensing)
- Protection Rating: IP65 (Waterproof and dustproof, suitable for outdoor use)
- Dimensions: Compact design (typically around 120mm x 80mm x 22mm)
- Weight: Approximately 150g
- Material: ABS plastic housing (weather-resistant, durable)
- Mounting Type: Surface mount
Access Control GT8E-W keypad waterproof
Access Control GT8E-W keypad waterproof Specification:
- Model: GT8E-W
- Material: High-strength zinc alloy, corrosion-resistant
- Waterproof Rating: IP65 (dust and waterproof, suitable for outdoor use)
- User Capacity: Supports up to 1,000 user codes
- Input Voltage: 12V DC
- Operating Current: < 50 mA
- Lock Output Load: ≤ 3A
- Operating Temperature: -40°C to 60°C (-40°F to 140°F)
- Operating Humidity: 10% to 90% (non-condensing)
- Authentication Mode: Supports PIN code entry; optional RFID card support available in some models
- Alarm Output: Built-in tamper alarm and door status monitoring output
- Wiring Interface: 6-wire connection for power, lock, and alarm integration
- Dimensions: Approx. 120 mm x 75 mm x 22 mm (L x W x D)
- Weight: 300g
Access Control I-Lock 7612 Unit
Access Control I-Lock 7612 Unit Specifications:
- Locking Mechanism: Electronic, keyless entry
- Access Methods:
- PIN Code: 4-6 digits
- RFID Card/Tag: Compatible with Mifare, EM4100, and other RFID standards
- Security Features: Anti-tamper detection
- Power Source: 4 AA or 2 CR123A lithium batteries
- Operating Temperature: -20°C to 60°C (-4°F to 140°F)
- Storage Temperature: -40°C to 85°C (-40°F to 185°F)
- Housing: Corrosion-resistant, typically made of stainless steel or high-quality polymers
- Weather Resistance: Rated IP65 (dust-tight and water-resistan
Access Control ID Card
Access Control ID Card Specifications:
- Material: Durable PVC or composite (PVC-PET/Polycarbonate)
- Size: Standard CR80 (credit card size), 85.60 mm x 53.98 mm (3.375" x 2.125")
- Thickness: Typically 0.76 mm (30 mil), customizable based on application
- Weight: Approximately 5-6 grams
- Frequency: 125 kHz (low frequency), 13.56 MHz (high frequency), or UHF (860-960 MHz)
- Protocols: ISO/IEC 14443A/B, ISO/IEC 15693 (for high-frequency RFID)
- Chip Types: MIFARE Classic, MIFARE DESFire, HID iCLASS, etc.
- Range: 2-10 cm (depending on reader and environment)
- Frequency: Typically 125 kHz
- Track Options: Tracks 1, 2, or 3 (HiCo or LoCo magnetic stripes)
- Smart Card: Embedded microprocessor for enhanced encryption and data storage
- Printing: Full-color or monochrome printing, front and back
- Security Features: Holograms, UV printing, watermarks, or embossed text
- Personalization: Photo ID, name, unique ID number, barcode/QR code
- Finish: Glossy or matte
- Temperature: -25°C to +50°C (-13°F to +122°F)
- Humidity: 5% to 95% non-condensing
- Lifespan: Typically 3-10 years depending on use and material quality
- Wear Resistance: Resistant to scratches, bending, and fading
- Compatibility: Supports most access control systems, including Wiegand, OSDP, and proprietary systems.
Access Control Induction Card
Access Control Induction Card specification:
- Material: PVC, ABS, or PET (durable plastic materials)
- Size: Standard size (85.6mm x 54mm, similar to a credit card) or custom sizes
- Thickness: 0.8mm to 1mm (varies depending on the manufacturer)
- Weight: Approx. 5-10 grams
- Color: Typically white, but can be customized with logos, graphics, and colors
- Frequency: 125 kHz (Low Frequency, LF) or 13.56 MHz (High Frequency, HF)
- Chip Type: EM4100 (125 kHz, low frequency)
- Data Storage: Unique ID (UID) stored in the chip
- Communication Protocol: ISO/IEC 14443 (for high-frequency cards like MIFARE)
- Passive: No battery required. The card is powered by the electromagnetic field generated by the card reader.
- Typically: 5-10 cm (2-4 inches), but may vary based on the reader and environment.
Access Control IP68 Wg26 Em/Mf Metal Keypad
Access Control IP68 Wg26 Em/Mf Metal Keypad Specifications:
- Material: Metal (typically stainless steel or high-grade aluminum)
- Protection Class: IP68 (dust-tight and resistant to continuous immersion in water)
- Card Type: EM (125 kHz) and MF (13.56 MHz) RFID
- Output: WG26
- Keypad Type: Tactile or capacitive
- Voltage: Typically 12V DC
- Current Consumption: Low (depends on the specific model)
- Operating Temperature: -20°C to 60°C
- Dimensions: Varies, typically around 100mm x 150mm
- Mounting: Surface or flush mounting options
Access Control K1201EM Master Care
Access Control K1201 EM Master Care Specification:
- Access Control Type: The K1201 EM Master Care is an electronic access control system that manages the entry and exit of users in secured areas.
- Card Type: Supports EM (Electromagnetic) cards, commonly used for RFID-based access control. These cards are often proximity or smart cards.
- PIN Code: The system can be configured to require a PIN entry in addition to the RFID card for an added layer of security.
- Multiple Entry Points: The system can control multiple doors or access points simultaneously, offering flexibility for various building layouts.
- Communication Protocol: Typically uses RS-485 for connecting to external devices like card readers and locks, although TCP/IP may also be supported for remote management.
- Remote Management: Offers remote management via software, allowing administrators to configure settings, monitor events, and control access remotely.
- Audit Trail: Provides detailed logs of who accessed which area and when, with a record of successful and failed access attempts.
- Encryption: Supports secure communication protocols, ensuring that the data exchanged between the system components is encrypted.
Access Control K1201EM Security Door
Access Control K1201EM Security Door Specifications:
- Access Modes: Card, PIN code, or a combination of both for enhanced security.
- Card Compatibility: Supports 125kHz EM cards.
- Programming: Simple programming via the keypad itself, no additional software required.
- Range: Card reading distance of up to 2–5 cm.
- Power Requirements: Operates on a 12V DC power supply.
- Output: Lock output load can handle up to 3A, compatible with most electronic locks.
- Security Features: Anti-interference capability and reliable performance due to an STC microprocessor.
- Weather Resistance: It’s built to function in various environments, though specific IP ratings may vary depending on the model.
Access Control M010EM-W Master Care
Access Control M010EM-W Master Care Specification:
- Power Supply: 12V DC
- Current Draw: ≤ 50mA (standby mode)
- Dimensions: 110mm x 75mm x 22mm
- Operating Temperature: -20°C to 60°C
- Material: Reinforced metal, anti-vandal structure
- Card Compatibility: 125kHz EM RFID cards
- User Capacity: 2,500 users
- Backlit Keypad: Ensures usability in low-light conditions
Access Control Magnetic Lock 280KG(600LB)
Access Control Magnetic Lock 280KG(600LB) Specification:
- Model: Magnetic Lock 280KG (600LB)
- Type: Electromagnetic Lock (Mag Lock)
- Holding Force: 280KG (600LB)
- Power Supply Voltage: 12V or 24V DC (ensure compatibility with your system)
- Current Draw: 12V Approximately 500mA to 1A
- Material: Stainless steel and high-strength permanent magnets
- Operating Temperature: -10°C to +50°C (14°F to 122°F) [check specific models for variations]
- Humidity Rating: Up to 95% non-condensing
- Installation Type: Surface mount or recess mount (depending on model)
- Status Indicator: LED light for lock status (locked/unlocked)
Access Control Magnetic Lock 500KG 1200LBS
Access Control Magnetic Lock 500KG 1200LBS Specification:
- Voltage: Commonly 12V DC or 24V DC (depending on the model).
- Holding Force: 500KG / 1200LBS.
- Power Consumption: Typically 12-30W, depending on the model and voltage.
- Material: Aluminum alloy housing with stainless steel armature plate.
- Dimensions: Varies by model but generally compact for easy integration into door frames.
- Operating Temperature: Can function within a range of -10°C to 55°C (14°F to 131°F).
- Waterproof Rating: Many models are rated with an IP54 or IP65 for protection against dust and water splashes.
- Connection Type: Wires are typically provided for easy connection to a control panel or power supply.
Access Control Magnetic Lock 60KG 130LBS
Access Control Magnetic Lock 60KG 130LBS Specification:
- Model Type: Magnetic Lock
- Holding Force: 60KG (130LBS)
- Voltage: 12V DC or 24V DC
- Current Consumption: Typically 150mA to 500mA depending on the model
- Size: Varies by manufacturer, typically around 230mm x 38mm x 25mm
- Material: Aluminum housing with high-quality magnetic materials
- Mounting Type: Surface Mount or Flush Mount
- Temperature Range: -10°C to 55°C (14°F to 131°F)
Access Control Magnetic Lock,180KG400LBS
Access Control Magnetic Lock,180KG400LBS Specification:
- Holding Force: 180KG (400LBS)
- Power Supply: Typically operates on 12V or 24V DC
- Material: Stainless steel casing with powerful magnets
- Size/Dimensions: Dimensions may vary by manufacturer, typically designed to fit standard doors easily.
- Connection Type: Wired connection to access control systems or direct power supply
- Operating Temperature: Designed to work within a standard temperature range suitable for indoor and outdoor applications (specifics depend on the model).
Access Control Metal Keypad RFID Reader Device -K5EM
Access Control Metal Keypad RFID Reader Device - K5EM Specification:
- Model: K5EM
- Access Control: Card + PIN
- Keypad Button Material: Metal
- IP Rating: No Waterproof
- Certification: RoHs, CE
- Card Support: EM (ID Card) 125kHz Proximity
- Material: Zinc Alloy
- Working Voltage: 12-24V DC
- Capacity: 2000 users
- Wiegand Interface: Wiegand 26-37 Bit
- Adjustable Door Relay Time: 1-99s
- Static Current: <30mA
Access Control NFC Card
Access Control NFC Card Specification:
- Technology: NFC (Near Field Communication)
- Frequency: 13.56 MHz (standard frequency for NFC cards)
- Memory: Typically 1 KB to 4 KB EEPROM (depends on the card)
- Data Transfer Rate: 106 kbps, 212 kbps, or 424 kbps (depending on the NFC protocol version)
- Material: PVC (Polyvinyl Chloride) or ABS (Acrylonitrile Butadiene Styrene)
- Card Size: Standard (85.6 mm x 54 mm) or custom sizes available
- Thickness: 0.8 mm (Standard thickness), varies for custom cards
- Weight: ~5-10 grams (depends on material and design)
- Durability: Water-resistant, scratch-resistant, can withstand high wear
Access Control NT – 02 Master Care
Access Control NT - 02 Master Care Specification:
- Power Supply: 12V DC
- Current Draw: ≤ 60mA (standby mode)
- Dimensions: 120mm x 80mm x 22mm (varies by model)
- Operating Temperature: -20°C to 60°C (depends on installation environment)
- Material: Durable, tamper-resistant plastic or metal casing
- Card Compatibility: Supports RFID cards, PIN codes, and potentially biometric devices (depending on the version)
- User Capacity: Up to 2,000+ users (depending on model)
- Communication: Wiegand, TCP/IP, RS232
Access Control NT – 04 Master Care
Access Control NT - 04 Master Care Specification:
- Power Supply: 12V DC
- Current Draw: ≤ 50mA (standby mode)
- Dimensions: 120mm x 85mm x 30mm (approx.)
- Operating Temperature: -20°C to 60°C (designed for both indoor and outdoor use)
- Material: Robust, tamper-resistant, and weatherproof housing
- Card Compatibility: Compatible with 125kHz RFID cards, biometric devices (optional), and PIN codes
- User Capacity: Supports up to 5,000 users
- Access Methods: RFID, PIN codes, Biometric (if applicable)
- Communication Protocols: Wiegand, RS232, TCP/IP